Heavy Duty Bucket
Geith excavator digging and grading buckets are suitable for light and heavy construction site work as well as for use in more demanding excavating conditions.
- Heavy Duty
- Fittings are designed exactly to match your excavator
- Robust Design
Despite the specific characteristics of each bucket type, all the Geith buckets share some common design features that make them unique. Below are some of the reasons for their superior strength and durability:
- Diamond folded top section for greater structural strength (a)
- Overlapping plate reduces stresses in critical areas (b)
- Dual Radius shape increases heel clearance reducing drag and wear (red line being a non dual radius design where the bottom of the bucket can drag against the ground more on digging) (c)
Heavy Duty Digging Bucket
- Diamond folded top section for greater structural strength
- Deep profile for high capacity.
- Grading buckets available with bolt on cutting edge.
- Overlapping plate reduces stresses in critical areas.
- Dual Radius shape increases heel clearance
Rock Duty Digging Bucket
- All bucket components are 400 BHN or higher
- Diamond folded section wear plate provides extra strength and wear protection
- Bottom wear straps using 400BHN to increase wear resistance
- Extra high side plate give higher strength and wear resistance in high wear areas
- 4 reinforcing gussets are used to strengthen up machine fittings
Extreme Duty Digging Bucket
- 3 Levels of wear protection for more extreme applications including internal wear straps, additional wear blocks (700 BHN) and side and blade shrouds.
- All bucket components are 400 BHN or higher
- Diamond folded section wear plate provides extra strength and wear protection
- Bottom wear straps using 400BHN to increase wear resistance
- Extra high side plate give higher strength and wear resistance in high wear areas
- 4 reinforcing gussets are used to strengthen up machine fittings
Heavy Duty Grading Bucket
- Reduced weight with high quality, abrasion resistant material
- Extra side and bottom wear plates, using AR400 heat treated special alloy steel as standard.
- Two web plates provide additional strength and distribute stresses evenly throughout the bucket
- Deep profile ideal for levelling and loading applications.
- Cast side cutter in BS9 models
- Optional reversable bolt on edge.
Machine Type Model Width mm Capacity
(m³)Weight
(kg)Heavy Duty - H14 H14-0300 300 0.11 265 10-14 Tons H14-0400 400 0.16 308 H14-0450 450 0.19 325 H14-0500 500 0.21 341 H14-0600 600 0.26 373 H14-0750 750 0.34 434 H14-0800 800 0.37 450 H14-0900 900 0.42 495 H14-1000 1000 0.47 527 H14-1050 1050 0.5 543 H14-1100 1100 0.52 560 H14-1200 1200 0.58 592 Heavy Duty - H18 H18-0450 450 0.23 412 14-18 Tons H18-0600 600 0.33 472 H18-0750 750 0.43 545 H18-0900 900 0.52 617 H18-1050 1050 0.62 677 H18-1100 1100 0.65 696 H18-1200 1200 0.72 737 H18-1300 1300 0.78 795 H18-1350 1350 0.82 809 H18-1500 1500 0.91 869 Heavy Duty - H25 H25-0450 450 0.31 482 18-25 Tons H25-0600 600 0.45 554 H25-0750 750 0.6 640 H25-0900 900 0.76 730 H25-1050 1050 0.92 800 H25-1100 1100 0.97 825 H25-1200 1200 1.08 871 H25-1350 1350 1.24 968 H25-1500 1500 1.4 1031 Heavy Duty - H30 H30-0600 600 0.45 658 23-30 Tons H30-0750 750 0.58 739 H30-0900 900 0.71 860 H30-1100 1100 0.88 925 H30-1200 1200 0.97 975 H30-1350 1350 1.1 1063 H30-1500 1500 1.23 1136 H30-1600 1600 1.32 1185 Heavy Duty - H38 H38-0750 750 0.69 998 30-38 Tons H38-0900 900 1.85 1111 H38-1200 1200 1.16 1333 H38-1350 1350 1.31 1426 H38-1500 1500 1.47 1521 H38-1700 1700 1.7 1679